Milenco Foam Wheel & Trim Protector for Wheelclamp (2 Strips) image 1 Milenco Foam Wheel & Trim Protector for Wheelclamp (2 Strips) image 2 Milenco Foam Wheel & Trim Protector for Wheelclamp (2 Strips) image 3 Milenco Foam Wheel & Trim Protector for Wheelclamp (2 Strips) image 4 Milenco Foam Wheel & Trim Protector for Wheelclamp (2 Strips) image 5

Milenco Foam Wheel & Trim Protector for Wheelclamp (2 Strips)

£2.74(inc VAT) £3.99
View delivery optionsView product description
  Product Description
Spare Keys and Locks are available for our Wheelclamps.

You will require the key number to obtain spare keys.

Original Wheelclamp Foam Protector

We can only supply replacement keys for the following wheelclamps:

Compact C Wheelclamp

Compact Wheelclamp

Lightweight Wheelclamps

For spare keys please email enquiries@milenco.com and they will advise where you can purchase them from.

We do not list every spare part for our Wheelclamps, however if you contact enquiries@milenco.com we will try to assist you in obtaining any spare parts you may require for your Milenco product.

6 FAQs on the Milenco Foam Wheel & Trim Protector for Wheelclamp (2 Strips)

The correct key is fully inserted and still will not turn.
Check that the Wraith Lock has free movement through the wheel of the caravan. The same as when it was fitted.

If the Wraith lock body does not have free movement, the lock will not release until this free movement is restored.

If your caravan has moved this applies a load to the lock, it is designed not to release to maximise security.

Move the caravan back so that there is, free movement with the Yellow lock body.

This may also be achieved with the corner steadies.

As a guide you should be able to rotate the Wraith, when fitted a minimum of 10 mm in either direction, subject to the aperture size in the wheel.

Please remember that once your key has turned about half a turn you still need to physically pull the Wheel Clamp off the wheel.
The correct key will not turn more than a quarter of a turn.
WARNING Do not force the key to turn.

Check the key is fully inserted into the lock. Turn clockwise as far as you can then applying pressure to the key rotate the key anti-clockwise. Repeat to ensure the key is fully inserted.

The first quarter of a turn, simply aligns the wafers in the lock. The second quarter of a turn opens the lock.
My key will not turn in the lock or only turns on quarter of a turn.
Check you have the correct key.
How do I fit my Original Wheelclamp?
Slide the Milenco front cover with top strap over the wheel in a horizontal position, avoiding the wheel arch of the vehicle.

Rotate so that the top strap is over the centre of the wheel.
Insert the right leg through the right side of the front cover, ensuring the rear leg goes behind the tyre.
Insert the key and release the lock by rotating the key 180 degrees clockwise.
Insert left leg through the left side of the front cover. (Note: Lower edge of left hand locking plate must insert over right hand locking plate.)
Lock wheelclamp by rotating the key 180 degrees anti-clockwise, and then remove your key.
To remove your Milenco wheelclamp insert key and turn 180 degrees clockwise, pull out left leg. Turn key 180 degrees anti-clockwise, remove key, pull out right leg.
Where can I get duplicate keys from?
Original Wheelclamp: You can purchase 2 x keys direct from Milenco on 01908 220102 providing us with your key number (delivery will take 10 working days).

If the key starts with the prefix T then you can purchase duplicate keys from Camlock Systems (01323 410996) and quote your key number, alternatively if you have lost all your keys but the clamp is unlocked you can purchase a new lock and 3 keys from Milenco 01908 220102.

Compact Wheelclamp and Compact Plus: You can purchase 2 x keys direct from Milenco on 01908 220102 providing us with your key number (delivery will take 10 working days).

Lightweight Wheelclamp: You can purchase 2 x blank keys direct from Milenco on 01908 220102 providing the letter prefix on the key (this would be either a V or L or a rounded top key).

Security Hand Rail, Door Locks and Door Frame Locks: You can purchase 2 x blank keys direct from Milenco on 01908 220102 providing the letter prefix on the key (this would be either a V or L).

New Heavy Duty Alko Albe Hitchlock and the Lightweight Hitchlock keys: You can purchase 2 x keys direct from Milenco on 01908 220102 providing us with your key number (delivery will take 10 working days).
I have lost locking clips/bar/spring
Please contact enquiries@milenco.com for spare parts.
  Loading...
If you’ve changed your mind about keeping your purchase, please return it in its original condition with proof of purchase and we’ll exchange or refund it. Unless faulty, this should be within 30 days of receiving your order. By original condition, we’d expect this to mean that you’ve kept packaging and labels, and that the item is undamaged and unused.

For further information of how to return your item, please visit the "Returning an Unwanted/Faulty/Damaged Item" section on our Help Page.
  Did you know we have been established and have been in the caravan and motorhome industry for over 50 years?

RELATED PRODUCTS

Trustpilot

SUPPORT

GET IN TOUCH

Please visit the help page or email us

orders@leisureshopdirect.com

HELP

HELP

INFORMATION

MY ACCOUNT