Morco D61E Instantaneous water heater image 1

Morco D61E Instantaneous water heater

£Discontinued
View delivery optionsView product description
ALTERNATIVE PRODUCT IS THE BOSCH W1359 PLEASE SEE QUICK VIEW LINK BELOW. NO ADAPTOR PLATE REUIRED FOR THIS.
The Morco D61E instantaneous multi point water heater is ideal for use in a mobile home, portable site office or beach hut.
It is also suitable as a replacement for an existing flued instantaneous water heater fitted in a boat or caravan.

The Morco D61E gives a flowrate of 6 litres per minute at a temperature rise of 25 degrees Celsius above ambient.

Maximum power input is 11KW. It requires a minimum operating pressure of 1Bar and must be connected to a conventional Flue.

The Morco D61E has a battery powered manual electronic ignition.
Pressing a button sends a stream of sparks to light the pilot much more easily than the traditional piezo.

Battery is AA size and pilot could be lit with a match in the event of battery failure.

Dimensions
Height = 590mm
Width = 266mm
Depth = 236mm

This gas heater is not suitable to be used in the following locations; a bedroom, a bathroom, a shower room, a hairdressing salon, a basement or private garage.

When used in a work place, a suitable risk assessment should be carried out. Adequate ventilation should be provided, see the manufacturers instructions for more details.

Unfortunately the factory manufacturing these heaters has gone into administration so we do not know if any more will be available. If they do become available then we will relist them.

What now?
We have been recommended that the closest alternative available is the following water heater:
Quick View     Bosch W1359 Water Heater


Specifications


  • Stylish design incorporating diverter hood.
  • Automatic ignition and flame failure on all burners.
  • Two burner control accommodates a wide variation of ambient water temperatures and can heat 6 litres of water in a minute.
  • Safety features include a water spillage device and easy drain down.
  • Gas type : Butane 28mbar, Propane 37mbar
  • Heat output : 8.7kW
  • Gas consumption : 0.8kg/h
  • Water pressure : Min 1 bar, Max 10bar
  • Connections : Gas 15mm compression, Water 15mm straight copper
  • Weight : 7.1kg
  • Dimensions : 573mm x 266mm x 190mm
  • Flue size : 83mm

  Loading...
If you’ve changed your mind about keeping your purchase, please return it in its original condition with proof of purchase and we’ll exchange or refund it. Unless faulty, this should be within 30 days of receiving your order. By original condition, we’d expect this to mean that you’ve kept packaging and labels, and that the item is undamaged and unused.

For further information of how to return your item, please visit the "Returning an Unwanted/Faulty/Damaged Item" section on our Help Page.
  Did you know we have been established and have been in the caravan and motorhome industry for over 50 years?

RELATED PRODUCTS