Protective Covers
Hi
It sounds like you have replaced all the parts connected to the flush, the only option left is one of the parts you replaced was faulty of there is a problem with the 12v supply to the toilet. I would suggest running a new 12v feed directly from a battery to the power inlet of the toilet to rule out a damaged wire in the supply, alternatively put a volt meter on the supply terminals and take a reading (I am presuming you have already done this and found a 12v supply), then get someone to press the flush button and see if this voltage disappears, if it does then there is a damaged wire in the supply feed
© Leisureshopdirect Ltd - 2004 . All rights reserved.
Already member? Sign in
